![]() |
Hardware |
Control Unit
PARTNER Version software runs on the IP 500v2 control unit. A PARTNER Version Secure Digital SD card is required and is installed in the rear of the control unit, providing operating software, Feature Key, Licenses and directs the system to boot up in PARTNER mode. An optional SD card may be installed in the Optional SD card slot, providing additional storage for Voicemail recordings, System Logs and redundant backup capability. |
|
Rear View
Front View
The front of the IP500v2 Control Unit has 4 expansion bays, which supports the following system modules:
|
|
• |
Phone 2 (Max 3 per system)
The Phone 2 module provides 2 additional Analog Station ports and supports (1) of the following optional Daughter Cards: ATM-4 or PRI/T1. |
• |
Phone 8 (Max 3 per system)
The Phone 8 module provides 8 additional Analog Station ports and supports (1) of the following optional Daughter Cards: ATM-4 or PRI/T1. |
Expansion Carrier
PARTNER Version supports (1) of the following Expansion Carriers:
• | DS-16 – provides additional 16 Digital Stations |
• | Phone 16 – provides additional 16 Analog Stations |
Daughter Cards
PARTNER Version supports the following daughter cards, which are mounted on any ETR-6, DS-8, Phone-2 or Phone-8 module:
|
|
© 2010 AVAYA
15-601041 Issue 20.f.- 18:14, 25 February 2010 (hardware.htm) Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others. All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya Inc. All other trademarks are the property of their respective owners. Last Modified: 20/01/2010 |