Interface
|
Information
|
DTE Port
|
•
|
9 way D-type D-Type female connector: V.24/V.28.
|
|
ISDN Ports
|
EU Interfaces:
•
|
BRI:
RJ45 sockets. ETSI T-Bus Interface to CTR3 for Pan European Connection.
|
•
|
PRI E1:
RJ45 socket. ETSI T-Bus Interface to CTR4 for Pan European Connection.
|
•
|
PRI T1/J1:
RJ45 socket: FCC Part 68/JATE connection.
|
USA Interfaces:
•
|
PRI T1 Service:
Ground Start (GS) – Default, E&M, 56k data for 5ESS, 56/64/64 restricted for 4ESS.
|
•
|
PRI ISDN Switch support:
4ESS, 5ESS, DMS-100, DMS-250 (includes conformance to ANSI T1.607 and Bellcore Special Report SR4287, 1992).
|
•
|
PRI ISDN Services:
AT&T Megacom 800, AT&T WATS (4ESS), AT&T SDS Accunet 56kB/s and 64kB/s (4ESS), AT&T Multiquest (4ESS).
|
|
Analog Trunk Ports
|
•
|
RJ45 sockets:
Loop start/Ground start (regional dependant)
|
|
Power Fail Ports
|
|
ISDN
Data Rates
|
•
|
BRI:
B-channel 64kbps or 56kbps, D-channel 16kbps.
|
•
|
PRI:
B-channel 64kbps or 56kbps, D-channel 64kbps.
|
|
Analog Phone Ports
|
•
|
CLI Schemes:
DTMFA, DTMFC, DTMFD, FSK and UK20.
|
•
|
REN:
2. (External Bell via POT port: REN = 1)
|
•
|
Off Hook Current:
25mA.
|
•
|
Ring Voltage:
40V (nominal) RMS.
|
|
LAN
|
•
|
RJ45 sockets. Auto-negotiating 10/100 BaseT Ethernet (10/100Mbps).
|
|
WAN
|
•
|
IP406 V2 and IP412: 37 way D-Type female sockets. X.21 interface to 2048k bps, V.35 interface to 2048Kbps and V.24 Interface to 19.2Kbps.
|
|
Audio
|
•
|
3.5mm Stereo Jack socket. Input impedance - 10k /channel.
|
•
|
Maximum AC signal – 200mV rms.
|
|
External
Output Port
|
•
|
3.5mm Stereo Jack socket. Switching Capacity - 0.7A.
|
•
|
Maximum Voltage - 55V DC. On state resistance - 0.7.
|
•
|
Short circuit current - 1A. Reverse circuit current capacity - 1.4A.
|
|
Embedded Voice Memory
|
•
|
IP406 V2 and IP500: 512MB Compact Flash memory card.
|
|