Show\Hide Navigation Product Description: IP Office Platform
Up Down Back Forwards Print Synch Bookmark and Share Bookmark and Share call us

IP500 Base Cards

The IP500 control unit has 4 slots for the insertion of cards. These cards can be divided into two types; base cards and daughter cards. Base cards include a front panel and ports for cable connections. Daughter cards can be added to a base card in order to provide additional facilities (typically trunk connections).

The following base cards are available:

IP500 Digital Station 8 Card (Maximum 3)
IP500 Analog Phone 2 Card and Phone 8 Card (Maximum 4)
IP500 VCM Card (Maximum 2)
IP500 4-Port Expansion Card (Maximum 1)
IP500 Legacy Card Carrier (Maximum 2)
ETR 6 Port Phone Card (Maximum 3, IP500 V2 only)
Combination Card with 2 Analog Trunks (Maximum 2, no daughter card, IP500 V2 only)
Combination Card with 2 BRI Trunks (Maximum 2, no daughter card, IP500 V2 only)

 

ip500 insert card

 

IP500 Digital Station 8 Card

This card provides 12 RJ45 ports. The first 8 ports are DS ports for the connection of Avaya digital phones other than IP phones. The card can be fitted with an IP500 daughter trunk card, which then uses the additional 4 RJ45 ports for trunk connections.

ip500 base ds8 3d

This card accepts one IP500 trunk daughter card of any type.
This card supports selected Avaya 2400, 5400 and 6400 Series phones, plus T3 phones(EMEA only) and 3810 wireless phones (North America only).
4400 Series phones (4406D, 4412D and 4424D) are not supported on this card, only on Digital Station expansion modules. Therefore a maximum of 360 x 4400 Series phones are supported in the system.

 

IP500 Analog Phone 2 Card

This card provides 2 analog extension ports (1-2) for the connection of analog phones. The card can be fitted with an IP500 daughter trunk card, which then uses the last 4 RJ45 ports (9-12) for trunk connections.

ip500 base phone8 3d

This card accepts one IP500 trunk daughter card of any type.

 

IP500 Analog Phone 8 Card

This card provides 8 analog extension ports for the connection of analog phones. The card can be fitted with an IP500 daughter trunk card, which then uses the additional 4 RJ45 ports for trunk connections.

ip500 base phone8 3d

This card accepts one IP500 trunk daughter card of any type. When fitted with an Analog Trunk daughter card, it provides a single power-fail port.

 

IP500 ETR 6 port Phone Card

This card provides 6 ETR ports for the connection of ETR 6/18/34 D, Euro-Style and Refresh digital phones as well as 3910/3920 wireless phones. The card can be fitted with an IP500 daughter trunk card, which then uses the additional 4 RJ45 ports for trunk connections. A maximum of three of these cards is allowed in the IP500 V2 chassis.

ETR6 card

This card

accepts one IP500 trunk daughter card of any type. When fitted with an Analog Trunk daughter card, it provides a single power-fail port.
works in IP500 V2 only.
is only supported by the IP Office Essential Edition - PARTNER Version (please see chapter 1b).

 

IP500 Combination Card with 4 Analog Trunks

This card works in the IP500 V2 only and provides:

4 analog trunk ports.
2 analog extension ports for the connection of analog phones.
6 Digital Station (DS) ports for the connection of Avaya digital phones.
10 VCM channels to support IP telephones or voice networking.

combo card atm

This card already includes a IP500 trunk daughter card, therefore no additional daughter card is possible. It provides a single power-fail port (either port 7 or port 8). A maximum of two of these cards is allowed in the chassis.

 

IP500 Combination Card with 2 BRI trunks

This card works in the IP500 V2 only and provides

2 BRI trunk ports (4 channels).
2 analog extension ports for the connection of analog phones.
6 Digital Station (DS) ports for the connection of Avaya digital phones
10 VCM channels to support IP telephones or voice networking

combo card bri

This card already includes a IP500 trunk daughter card, therefore no additional daughter card is possible. it provides a single power-fail port (either port 7 or port 8). A maximum of two of these cards is allowed in the chassis.

 

IP500 VCM Card

This card provides voice compression channels for use with VoIP calls, SIP trunks and IP-based voice networking. The module is available in variants supporting 32 or 64 channels.

ip500 base vcm 3d

The maximum number of voice compression channels supported, using IP500 VCM base cards, Combination Cards and / or IP400 VCM cards on IP500 Legacy Card Carriers, is 148.

Please note, the maximum number of channels which may be used on each IP500 VCM card varies according to the codec used, as shown in the following table.

Maximum VCM channels available, by codec type:

 

VCM 32 Card

VCM 64 Card

Combination Card

G.711

32

64

10

G.729

30

60

10

G.723

22

44

10

The card can be fitted with an IP500 daughter trunk card, which uses the 4 RJ45 ports for trunk connections.

This card accepts one IP500 trunk daughter card of any type.

For more details about VCM channel requirements please refer to IP Telephony.

 

IP500 4-Port Expansion Card

This card provides connectors for 4 additional expansion modules.
The 4-port expansion card must be inserted in slot 4 of the control unit.
It is not possible to connect a daughter card to the 4-port expansion card.

ip500_4port_base

 

IP500 Legacy Card Carrier

This card allows a variety of IP400 trunk and VCM cards to be used with the IP500 control unit. The front of the card includes a number of panels that can be snapped off to match the ports available when an IP400 trunk card is fitted.

ip500 base carrier 3d ip500 carrier several small

 

This card does not accept any IP500 daughter trunk cards.
The IP500 control unit can accept up to 2 IP400 trunk or VCM cards by mounting each card on an IP500 Legacy Card Carrier
This card supports the following IP400 cards:
tick PRI T1
tick Dual PRI T1
tick PRI 30 E1 (1.4)
tick Dual PRI E1
tick PRI 30 E1R2 RJ45
tick Dual PRI E1R2 RJ45
tick ANLG 4 Uni
tick BRI-8 (UNI)
tick VCM 4
tick VCM 8
tick VCM 16
tick VCM 24
tick VCM 30

 

 

© 2010 AVAYA
15-601041 Issue 20.f.-
18:14, 25 February 2010
(ip_office_500_cards.htm)

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others.

All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya Inc. All other trademarks are the property of their respective owners.

Last Modified: 11/01/2010