Show\Hide Navigation Product Description: Public and Private Voice Networks
Up Down Back Forwards Print Synch Bookmark and Share Bookmark and Share call us

Private Circuit Switched Voice Networking

Private voice networks are built using structured leased line circuits (E1 or T1) or by establishing permanently connected 'B' channels over ISDN circuits between IP Office systems. Each channel within the E1 or T1 interface can provide a single voice or 64K/56K data call. Where leased line circuits are used within a private networking scenario, these E1 or T1 interfaces are typically configured to use QSIG signaling between sites.

QSIG provides a level of voice feature transparency between PBXs and is the favored signaling standard within multiple vendor and international voice networks. The IP Office E1 or T1 module terminates a QSIG connection with a 120 ohm RJ45 interface.

IP Office supports the following QSIG services across this network:

Simple Telephony Call/Basic Call: ETS300 171/172.
Circuit Switched Data Call/Basic Call: ETS300 171/172.
Called/Calling Line ID Presentation: ETS300 173.
Called/Calling Name Presentation: (SS-CNIP, SS-CONP, SS-CNIR) ETS300 237/238.
Message Waiting: (SS-MWI) EN301 260/255.
Transfer: (SS-CT) ETS 300 260/261.

trad_voice_net

Circuit Switched Voice Networking

 

 

© 2010 AVAYA
15-601041 Issue 20.f.-
18:14, 25 February 2010
(privatevoicenetworking.htm)

Performance figures, data and operation quoted in this document are typical and must be specifically confirmed in writing by Avaya before they become applicable to any particular order or contract. The company reserves the right to make alterations or amendments at its own discretion. The publication of information in this document does not imply freedom from patent or any other protective rights of Avaya or others.

All trademarks identified by (R) or TM are registered trademarks or trademarks respectively of Avaya Inc. All other trademarks are the property of their respective owners.

Last Modified: 09/06/2008